Foam Eductors
Protek 201 In-Line Eductor
- Attaches to 1 ½” or 2 ½” nozzles.
- 1 ½” or 2 ½” female swivel inlet X 1 ½” male outlet.
- Rugged all brass construction.
- Furnished with reinforced 30” PVC pickup hose to prevent kinking.
- Check ball to prevent back flow into the foam concentrate.
- Detachable metering device for cleaning.
- 5 Settings: 0.5%, 1%, 3%, 6% and 0 (shutoff).
- Works with most foam concentrates.
- Eductor rated to flow at 200 psi inlet pressure and works well with nozzles rated 75-100 psi.
- 60 or 95 GPM models.
Protek 203 In-Line Eductor
- Attaches to 1 ½” or 2 ½” nozzles.
- 1 ½” or 2 ½” female swivel inlet X 1 ½” male outlet.
- Lightweight alloy.
- Furnished with reinforced 30” PVC pickup hose to prevent kinking.
- Check ball to prevent back flow into the foam concentrate.
- Detachable metering device for cleaning.
- Detachable metering valve with infinite settings between 0% and 6% with detents at 0.25% and 0.5% 60, 95, 125 GPM.
- Works with most foam concentrates.
- Eductor rated to flow at 200 psi inlet pressure and works well with nozzles rated 75-100 psi.
- 60, 95, or 125 GPM models.
Protek 222 Portable By-Pass Eductor
- 1 ½” or 2 ½” swivel inlet X 1 ½” male outlet.
- Brass construction
- Rated to flow at 200 PSI (14 bar) inlet pressure
- Allows the operator to change from water to foam without shutting down
- Detachable metering valve with infinite settings between 0% and 6% with detents at 0.25%, 0.5%, 1%, 3% and 6%
- 60, 95, or 125 GPM models.
|
