Fire Suppression

Valves & Appliances

Valve Hardware

Northline FSGR Piston Intake Relief Valve – Aluminum

Northline FSGR Piston Intake Relief Valve – Aluminum

  • Valve permits safe controlled flow to the intake pump.
  • Made of lightweight aluminum alloy.
  • Hard anodized to fight corrosion.
  • Complete with a 30° built in elbow permitting smoother water flow.
  • Adjustable pressure relief valve is factory set at 100 PSI and labeled with valve settings for your convenience.
  • Retractable knob on hand wheel supplied with stainless housing to avoid quick seizing.
  • Supplied with air bleed off.
Northline FSGR-B Piston Intake Relief Valve – Brass

Northline FSGR-B Piston Intake Relief Valve – Brass

  • Design offers low friction loss; less than 10 PSI at 1500 GPM.
  • Valve permits safe controlled flow to the intake pump.
  • Made with 100% corrosion proof, red brass material.
  • Complete with a 30° built in elbow permitting smoother water flow.
  • Adjustable pressure relief valve is factory set at 100 PSI and labeled with valve settings for your convenience.
  • Retractable knob on the hand wheel supplied with stainless housing to avoid quick seizing.
  • Supplied with a 5⁄8" air bleed off.
Kocheck 70K Piston Intake Valve

Kochek 70K Piston Intake Valve

  • Compact, lightweight, powder coated, aluminum body piston valve with 30-degree elbow.
  • New corrosion resistant piston
  • Large turbulence reducing oval waterway for minimal friction loss.
  • Forged Storz head with stainless steel locking mechanism.
  • Pressure relief valve allows for easy adjustments from 75-250 PSI in increments of 25 PSI, with round 2 5⁄8” dump.
  • Extends only 10 1⁄4” from pump panel.
  • Tested per NFPA 1965
  • Available with full time swiveling Storz heads to prevent hose kinking.
  • Data Sheet
Northline FSRV 30° Elbow – Complete with Pressure Relief Valve

Northline FSRV 30° Elbow – Complete with Pressure Relief Valve

  • Designed to connect large diameter hose to the suction intake where gate valves are not desired.
  • Compact elbow comes complete with a pressure relief valve and air bleed off.
Northline FSGV Gate Valve – Standard

Northline FSGV Gate Valve – Standard

  • Made of lightweight aluminum alloy, hard anodized to fight corrosion.
  • Can be used on the suction intake and discharge sides of a pumper or on a fire hydrant.
  • Complete with a non-rising stem and 1⁄4" air bleed off.
  • Hand wheel supplied with durable plastic knob to fight against corrosion.
Northline FSGV 30° Gate Valve – 30° Elbow

Northline FSGV 30° Gate Valve – 30° Elbow

  • Made of lightweight aluminum alloy, hard anodized to fight corrosion.
  • Can be used on the suction intake and discharge sides of a pumper or on a fire hydrant.
  • Complete with a non-rising stem, 30° Elbow and 1⁄4" air bleed off.
  • Hand wheel supplied with durable plastic knob to fight against corrosion.
S&H Gate Valve

Northline Gate Valve

  • Hydrant Gate Valve 21⁄2" x 21⁄2"
Northline FSGV 30° Gate Valve – 30° Elbow and Pressure Relief Valve

Northline FSGV 30° Gate Valve – 30° Elbow and Pressure Relief Valve

  • Permits safe controlled flow to the intake pump and can also be used to draft.
  • Made of lightweight aluminum alloy, hard anodized to fight corrosion.
  • Valve can be used on the suction intake and discharge sides of a pumper.
  • Complete with a Pressure Relief Valve, non-rising stem, 30° Elbow and 1/4” air bleed off.
  • Hand wheel is supplied with a durable plastic knob to fight against corrosion.
  • Pressure relief valve can be mounted in three different positions for discharge purposes.
Northline HGV 250 – 2 1/2” Hydrant Gate Valve

Northline HGV 250 – 2 1/2” Hydrant Gate Valve

  • Made of lightweight aluminum alloy, hard anodized to fight corrosion.
  • It has a full flow 21⁄2" waterway.
Protek 595 Hydrant Valve

Protek 595 Hydrant Valve

  • Hydrant Valve.
  • Lightweight alloy.
  • 21⁄2" full flow waterway.
  • Self-locking handle for positive positioning.
  • Adapter easily removed for seat adjustment.
  • 21⁄2" female inlet X 21⁄2" male outlet.
  • Weight: 7 lbs.
Protek 596 Gate Valve

Protek 596 Gate Valve

  • Gate Valve.
  • Lightweight alloy.
  • Wedge seat gate valve.
  • Non-rising stem design.
  • Crank handle for easier operation.
  • 21⁄2" female inlet X 21⁄2" male outlet.
  • Weight: 4.5 lbs.
Northline FSHV – Hydrant Booster

Northline FSHV – Hydrant Booster

  • Can be used as a hydrant booster and also for inline pumping.
  • Valve is initially connected to hydrant and water pumped directly from hydrant to fire.
  • If pressure is low, valve can be connected to second pumper without interrupting flow.
  • There is also a third position, allowing emergency shut-down.
Northline MSBV – 2 Way Ball Valve

Northline MSBV – 2 Way Ball Valve

  • Made of lightweight aluminum alloy, hard anodized to fight corrosion.
  • Supplies two attack lines from one large diameter line.
  • 21⁄2" outlet is a gated ball valve resulting in safe controlled flow of water.
  • Compact unit comes complete with carrying handle.
Northline FMBV 2 Way Ball Valve – Female Swivel Inlet x Male Outlet

Northline FMBV 2 Way Ball Valve – Female Swivel Inlet x Male Outlet

  • Known as a “Leader Line Wye”.
  • Comes complete with 21⁄2" Female Swivel Inlet x (2) 11⁄2" Male Threaded Outlets.
  • Threads are made from lightweight 6061-T6 extruded material.
  • Laser engraved for easy identification.
Northline SJBV – Large Gated Wye with Pressure Relief Valve

Northline SJBV – Large Gated Wye with Pressure Relief Valve

  • Made of lightweight aluminum alloy, hard anodized to fight corrosion.
  • Supplies multiple lines from one large diameter line.
  • Two large gated outlets help control the flow of water and provide easy shutdown.
  • Equipped with a pressure relief valve.
Northline MSBVR(3) – 3 Way Ball Valve with Pressure Relief Valve

Northline MSBVR(3) – 3 Way Ball Valve with Pressure Relief Valve

  • Feeds three smaller attack lines from one large diameter supply line.
  • Outlets are gated ball valves for safe controlled flow of water.
  • Equipped with an adjustable relief valve.
  • Comes complete with a built in carrying handle.
Northline MSMG – 5 Way Manifold with Pressure Relief Valve and Gauge

Northline MSMG – 5 Way Manifold with Pressure Relief Valve and Gauge

  • Supplies multiple attack lines with one large diameter inlet line.
  • Provides one large diameter gated outlet and four 21⁄2" gated outlets.
  • Pressure gauge and adjustable pressure relief valve are standard.
S&H T Valve

S&H Hose Line “T" Valve

NH & NPSH threads available, sizes include:

  • 1" x 3⁄4"
  • 1" x 1"
  • 11⁄2" x 1"
S&H Short Handle Wye Valve

S&H Short Handle Wye Valve

Compact valves fit neatly in confined storage areas like cargo compartments, hose pack, etc. NH & NPSH threads available, sizes include:

  • 1" x 1"
  • 11⁄2" x 1"
  • 11⁄2" x 11⁄2"
Protek 505 Forestry Wye

Protek 505 Forestry Wye

  • Male adapters are easily removed for adjustments of seats.
  • 1" female inlet X two 1" male outlets.
  • Weight 2.1 lbs.
Protek 506 Forestry Wye

Protek 506 Forestry Wye

  • Male adapters are easily removed for adjustment of seats.
  • 11⁄2" female inlet X two 11⁄2" male outlets.
  • Weight 2.3 lbs.
Protek 510 Water Thief

Protek 510 Water Thief

  • Strong lightweight aluminum construction.
  • 21⁄2" to 6" female inlet X two 11⁄2" & one 21⁄2" male outlet.
  • Self-locking handle for positive positioning.
  • Male adapters are easily removed for adjustment of seats.
  • Used for laying, extending or adding 11⁄2" or 21⁄2" lines without interfering with the operation of other lines.
  • Weight 13.5 lbs.
S&H Gated Wye Valve

S&H Gated Wye Valve

Female inlet x (2x) Male outlet

  • 1" x 1" WYE Valve
  • 11⁄2" x 1" WYE Valve
  • 11⁄2" x 1 1⁄2" WYE Valve
  • 21⁄2" x 1 1⁄2" WYE Valve
  • 21⁄2" x 2 1⁄2" WYE Valve
Protek 520 Leader Line Wye

Protek 520 Leader Line Wye

  • Strong lightweight aluminum construction.
  • 21⁄2" female inlet X two 11⁄2" male outlets.
  • Our most popular Protek “Gated Y”.
  • Designed for heavy duty use.
  • Male adapters are easily removed for adjustment of seats.
  • Weight 4.0 lbs.
Protek 530 Leader Line Wye

Protek 530 Leader Line Wye

  • Strong lightweight aluminum construction.
  • 21⁄2" female inlet X two 11⁄2" male outlets.
  • Self locking handle for positive positioning.
  • Male adapters are easily removed for adjustment of seats.
  • Weight 6.4 lbs.
Protek 540 Hydrant Wye

Protek 540 Hydrant Wye

  • Strong lightweight aluminum construction.
  • 21⁄2" to 6" female inlet X two 11⁄2" male outlets.
  • Self locking handle for positive positioning.
  • Male adapters are easily removed for adjustment of seats.
  • Used to lay 2 lines from hydrant to pumper
  • Also used to branch a 21⁄2" or larger supply into two 11⁄2" lines
  • Weight 14 lbs.
Protek 541 Hydrant Wye

Protek 541 Hydrant Wye

  • Hydrant Wye
  • 11⁄2" to 6" female inlet X two 21⁄2" male outlets
  • Weight 8.1 lbs.
Protek 550 3-Way Hydrant Wye

Protek 550 3-Way Hydrant Wye

  • Strong lightweight aluminum construction.
  • 21⁄2" to 6" female inlet X three 21⁄2" male outlets.
  • Self locking handle for positive positioning.
  • Male adapters are easily removed for adjustment of seats.
  • Used to lay 3 lines from hydrant to pumper.
  • Also used to branch a 21⁄2" or larger supply into three 21⁄2" lines.
  • Weight 21.6 lbs.
Northline FSSV – 2 Way Siamese

Northline FSSV – 2 Way Siamese

  • Made of lightweight aluminum alloy, hard anodized to fight corrosion.
  • This Siamese will supply a large diameter line from two attack lines.
  • 21⁄2" inlets are clappered; clappers can be removed for opposite flow applications.
Northline FSSV(3) – 3 Way Siamese

Northline FSSV(3) – 3 Way Siamese

  • Made of lightweight aluminum alloy, hard anodized to fight corrosion.
  • This Siamese will supply a large diameter line from three attack lines.
  • 21⁄2" inlets are clappered; clappers can be removed for opposite flow applications.
Northline FSSV(4) – 4 Way Siamese

Northline FSSV(4) – 4 Way Siamese

  • Made of lightweight aluminum alloy, hard anodized to fight corrosion.
  • This Siamese will supply a large diameter line from four attack lines.
  • 21⁄2" inlets are clappered; clappers can be removed for opposite flow applications.
Northline SSVJ – Jumbo Siamese

Northline SSVJ – Jumbo Siamese

  • Made of lightweight aluminum alloy, hard anodized to fight corrosion problems.
  • Used to supply one large diameter hose from two large diameter hose lines.
  • Jumbo Siamese features a swinging clapper that can be removed for opposite flow applications.
Protek 545 Suction Siamese

Protek 545 Suction Siamese

  • Strong lightweight aluminum construction.
  • Two 21⁄2"female swivel inlet x 21⁄2" to 6" female outlet.
  • Self locking handle for positive positioning.
  • Used for pumper suction or aerial platform inlets.
  • 21⁄2" swivel inlets are supplied with strainer.
  • Weight 15.1 lbs.
Protek 555 3-Way Suction Siamese

Protek 555 3-Way Suction Siamese

  • Strong lightweight aluminum construction.
  • Three 21⁄2" female swivel inlet x 21⁄2" to 6" female outlet.
  • Self locking handle for positive positioning.
  • Used for pumper suction or aerial platform inlets.
  • 21⁄2" swivel inlets are supplied with strainer.
  • Weight 20.0 lbs.
Protek 585 Clappered Valve Siamese

Protek 585 Clappered Valve Siamese

  • Strong lightweight aluminum construction.
  • Two 21⁄2" female swivel inlet X 21⁄2" outlet.
  • Used to join 2 lines into one.
  • Double clappers.
  • Optional drain valve.
  • Rubber carrying handle.
  • Weight 6.4 lbs.
Protek 587 Plain Wye

Protek 587 Plain Wye

  • Plain Wye.
  • 21⁄2" to 6" female inlet X two 21⁄2" male outlets.
  • Weight 4.3 lbs.
Northline PRV – Pressure Relief Valve

Northline PRV – Pressure Relief Valve

  • Adjustable from 50 PSI to 200 PSI.
  • Comes complete with a cartridge type, stainless steel, double spring and is hard anodized.
  • Valve settings are supplied on the side of each unit with an illustration.
  • Also available with 21⁄2" Female and Male Threads.
Northline FMBTFLY - Butterfly Valve

Northline FMBTFLY - Butterfly Valve

  • Made with lightweight aluminum flanges, hard anodized to provide longer life span.
  • Permits safe controlled flow to the intake pump; can be used for draft.
  • Body style is ASTN A-126 Cast Iron with standard 10 position lever handle.
  • Comes furnished with a 3⁄4" push-pull drain valve.
  • Available with Female, Male threads or Storz connections.

Used Equipment

See More